Cleaning, sanitizing and disinfecting are three words that get thrown around like they all mean basically the same thing.
They don’t.
At Schneider Paper Products in Baton Rouge, Louisiana, I deal with cleaning chemicals and facility-maintenance products every day, and understanding these three terms is one of the basics.
A surface can be clean without being sanitized.
It can be sanitized without being disinfected.
And spraying disinfectant on something that is covered in dirt doesn’t magically make the dirt surrender.
Each process has a different job.
Cleaning Is About Removing the Mess
Cleaning is the starting point.
The purpose of cleaning is to remove dirt, grease, food residue, dust, organic material and other unwanted substances from a surface.
Soap, detergent, water and physical action all play a role.
Think about a restaurant table after lunch.
There might be crumbs, grease, spilled ketchup and whatever mysterious sticky substance seems to appear on every restaurant table eventually.
Before worrying about microorganisms, the physical mess needs to go.
Cleaning can also remove many germs simply because they are physically carried away with the dirt and cleaning solution.
But cleaning doesn’t necessarily mean the surface has been sanitized or disinfected.
It means the surface has been cleaned.
Simple enough.
Sanitizing Takes Things a Step Further
Sanitizing is about reducing certain microorganisms on a surface to levels considered acceptable under applicable public-health standards.
This term comes up frequently around food-contact surfaces.
Restaurant kitchens are an obvious example.
A food-preparation surface might first be cleaned to remove grease and food particles and then sanitized using an appropriate product.
The order matters.
Trying to sanitize a surface covered in last night’s dinner isn’t exactly setting the chemical up for success.
Organic material and dirt can interfere with how sanitizers work, which is one reason cleaning generally comes first when visible soil is present.
Disinfecting Has a Different Purpose
Disinfecting involves using a product designed to kill or inactivate specified microorganisms on environmental surfaces.
That’s different from simply reducing the number of microorganisms.
Disinfectants have specific organisms listed on their labels based on the product’s tested and registered uses.
This is where reading the label becomes extremely important.
The label isn’t decorative literature included because the manufacturer had extra room on the bottle.
It tells exactly how that product is intended to be used.
Contact Time Matters
One of the most misunderstood parts of sanitizing and disinfecting is contact time.
A product may need to remain on a surface for a specified amount of time to accomplish what the label says it does.
Spraying a disinfectant and immediately wiping it away may not provide that required contact time.
Different products have different requirements.
That means the familiar spray-and-wipe maneuver isn’t automatically disinfecting just because the bottle says disinfectant.
The instructions matter.
If a product requires the surface to remain wet for a particular period, wiping everything dry after five seconds changes the process.
Patience is apparently part of cleaning chemistry.
More Chemical Isn’t Necessarily Better
There is also a natural temptation to assume that if a little chemical works, a whole lot must work even better.
Chemistry doesn’t always appreciate that logic.
Many concentrated cleaning products, sanitizers and disinfectants are designed to be used at specific dilution ratios.
Too little product may reduce effectiveness.
Too much can create unnecessary residue, increase exposure or potentially damage certain surfaces.
A five-gallon bucket doesn’t become five times cleaner because somebody dumped half the bottle into it.
Follow the dilution instructions.
Chemists already did the math.
Not Every Surface Needs the Same Treatment
Another common misunderstanding is that everything needs to be disinfected constantly.
That isn’t necessarily the case.
A dusty bookshelf probably needs cleaning.
A food-preparation surface may need cleaning followed by sanitizing.
Certain high-touch surfaces or areas where illness is a concern may require cleaning followed by appropriate disinfection.
The correct process depends on the surface, environment and reason for treating it.
Bathrooms, kitchens, offices, schools and healthcare environments don’t necessarily have identical cleaning requirements.
Even within the same building, different surfaces can require different procedures.
High-Touch Surfaces Deserve Attention
Some surfaces simply get touched more often than others.
Door handles are obvious.
So are restroom fixtures, counters, shared equipment, light switches and certain electronics.
The more frequently a surface is touched, the more opportunities exist for material and microorganisms to be transferred onto it.
That doesn’t mean every doorknob requires someone standing beside it with a spray bottle 24 hours a day.
It does mean high-touch surfaces deserve consideration when establishing routine cleaning and disinfection procedures.
Surface Compatibility Matters
A chemical can work exactly as designed and still be the wrong choice for a particular material.
Some products can affect metals, plastics, fabrics, flooring or finished surfaces.
Repeated exposure to an incompatible chemical can cause discoloration, corrosion or deterioration.
That’s another reason the label matters.
Using the strongest-smelling chemical available isn’t a scientific cleaning strategy.
Neither is assuming that something must be working because everybody in the building can smell it from the parking lot.
Never Start Playing Chemist
This part deserves special attention.
Cleaning chemicals should not be randomly mixed.
Some combinations can create dangerous reactions.
Bleach and ammonia are a familiar example. Combining certain bleach products with acids can also release hazardous gases.
Cleaning products should be used according to their instructions rather than combined in an attempt to create some sort of homemade super-cleaner.
If two chemicals individually clean things, that does not mean mixing them creates Captain Clean.
It can create an emergency.
The Difference Comes Down to Purpose
The easiest way to remember the difference is to think about what each process is intended to accomplish.
Cleaning removes dirt, debris and unwanted material.
Sanitizing reduces certain microorganisms to established levels.
Disinfecting kills or inactivates specified microorganisms according to the product’s labeled claims.
- Sometimes only cleaning is necessary.
- Sometimes cleaning and sanitizing are appropriate.
- Sometimes cleaning followed by disinfection is called for.
Understanding the difference helps determine which product and procedure make sense for a particular situation.
At Schneider Paper Products, I spend a lot of time around cleaning products, paper products and facility-maintenance supplies.
One thing becomes pretty obvious after a while:
- The bottle matters.
- The chemical matters.
- The surface matters.
But knowing what job is actually being attempted matters first.
Because cleaning, sanitizing and disinfecting may live on the same janitorial shelf, but they definitely aren’t three different names for the same thing.
— Destin Pizer
Owner, Schneider Paper Products
Baton Rouge, Louisiana

